- 工作方式
- 现场办公
- 类型
- 全职
职责
- 在 JDM 合作伙伴现场领导早期硬件启动，作为验证新定制 PCBA 和机器人子组件的第一道防线。
- 编写强大的 C/C++ 诊断和测试固件，以在制造过程中验证微控制器、通信总线、电源系统和传感器的功能。
- 与硬件和测试工程部门合作，设计、部署、排除故障并维护装配线的自动化功能测试 (FCT) 夹具。
- 使用逻辑分析仪、示波器和定制调试工具，在工厂车间实时找出复杂、系统级制造缺陷的根本原因。
- 作为 Figure 位于美国的硬件/固件团队与 JDM 合作伙伴工程人员之间的关键实时技术联系。
必备要求
- 必须居住在中国（或愿意搬迁至中国），并能够经常前往亚洲其他制造中心，包括台湾和越南。
- 电气工程、计算机工程、计算机科学专业的学士或硕士学位，或具备同等经验。
- 能够为嵌入式、资源受限的系统编写简洁、优化的 C/C++ 代码。
- 具备出色的阅读和理解电路图、PCB 布局图和元件数据手册的能力，能够快速调试硬件问题。
- 在新产品导入 (NPI) 期间，拥有在工厂车间与联合开发制造商 (JDM)、合同制造商 (CM) 或原始设计制造商 (ODM) 直接合作的实践经验。
- 具备调试嵌入式通信总线（如 CAN、I2C、SPI 和 UART）的实践经验。
优先条件
- 具备专业的普通话工作能力对于与当地 JDM 工程团队进行有效沟通至关重要。
- 拥有将复杂的消费电子产品、机器人或汽车硬件从初始原型通过 EVT/DVT/PVT 推进到批量生产的成功经验。
- 精通 Python，能够开发制造测试脚本、数据解析器和自动化测试夹具基础设施。
- 熟悉先进机器人典型的分布式系统、传感器（IMU、绝对编码器、力矩传感器）和电源要求。
Responsibilities
- Lead early hardware bring-up on-site at JDM partners, serving as the first line of defense for validating new custom PCBAs and robot sub-assemblies.
- Write robust C/C++ diagnostic and test firmware to validate microcontrollers, communication buses, power systems, and sensors during manufacturing.
- Collaborate with hardware and test engineering to design, deploy, troubleshoot, and maintain automated functional test (FCT) fixtures on the assembly line.
- Use logic analyzers, oscilloscopes, and custom debug tools to root-cause complex, system-level manufacturing defects in real time on the factory floor.
- Act as the key real-time technical liaison between Figure's US-based hardware/firmware teams and JDM partner engineering staff.
Must Have
- Must reside in China (or be willing to relocate) and be able to travel frequently to other Asian manufacturing hubs, including Taiwan and Vietnam.
- Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, Computer Science, or equivalent experience.
- Proficiency in C/C++ with the ability to write clean, optimized code for embedded, resource-constrained systems.
- Strong hardware knowledge: ability to read and understand schematics, PCB layouts, and component datasheets to quickly debug hardware issues.
- Hands-on experience working directly with joint development manufacturers (JDM), contract manufacturers (CM), or original design manufacturers (ODM) on the factory floor during new product introduction (NPI).
- Hands-on experience debugging embedded communication buses (e.g., CAN, I2C, SPI, and UART).
Preferred
- Professional working proficiency in Mandarin is essential for effective communication with local JDM engineering teams.
- Proven success in taking complex consumer electronics, robotics, or automotive hardware from initial prototype through EVT/DVT/PVT to mass production.
- Proficiency in Python for developing manufacturing test scripts, data parsers, and automated test fixture infrastructure.
- Familiarity with distributed systems, sensors (IMU, absolute encoders, torque sensors), and power requirements typical of advanced robotics.
公司简介
Figure 是一家人工智能机器人公司，致力于开发自主通用人形机器人，目标是交付具备人类智能水平的人形机器人。其机器人经过精心设计，可在家庭和商业市场执行各种任务。Figure 采用联合开发制造 (JDM) 模式，与制造合作伙伴深度协作，共同开发下一代硬件。